Thanks to AKK Tek for sending over these Micro AIO cameras for review.


AKK BA3

Official AKK product page: AKK BA3

Features:
• AIO FPV camera+transmitter+brass dipole antenna. All 3 functions in one limit size and weight of 4.7grams.
• Output power 25mW/50mW/200mW switchable. Compatible with 5.8GHz goggles and monitors.
• Requires 1S LiPo battery. Signal range suitable for Ultra Micro RC Aircraft.
• 120° FOV horizontal viewing angle of 150° DFOV diagonal perspective. Vertically inverted image switch and horizontal mirror image switch.
• Installs in seconds. Support TX RF output power enable/disable output enable/disable.

Specifications:
FPV Camera:
• Output Power: 0/25mW/50mW/200mW (switchable)
• Input Power: 3.2-5.5V
• Sensor: 1/3 “CMOS
• Camera Resolution: 600TVLA
• Angle: 120 ° FOV horizontal viewing angle 150 ° DFOV diagonal perspective
• Mini illumination: 1 lux
• Format: NTSC

Transmitter:
• Support Video Format: NTSC
• Output Impedance: 50 Ohm
• Output signal strength: 13±1dbmdBm
• Output Power: 25mW: 14dBm /50mW: 17dBm /200mW: 23dBm
• Wireless Channel: 40CH
• Operating voltage: 3.2V ~ 5.5V
• Current consumption: 25mW: 250mA-510mA /50mW: 270mA-640mA /200mW: 330mA-740mA
• Audio carrier: NO

The box

 

 

Open box

 

 

Contents
20170817_140027_wm
• BA3 AIO FPV Camera
• Adapter cable
• English Manual

BA3 AIO FPV camera

 

 

Adapter cable

 

 

English manual

 

 

AKK S2

Official AKK product page: AKK S2

Features:
• Super light weight, All in one VTX + 600TVL Camera + Clover Antenna
• A Ready to fly Micro AIO Camera Combo
• 2 row LED indicators, 6 LED for the band, 8 LED for the channel.
• 4-leaf antenna for better signal transmission, easy to install.
• 48 channel with race band. A good quality image with zero latency. Button control instead of switches to change channels.
• The go to camera for the Tiny Whoop racing. Combined with the Inductrix for perfect FPV addition.
• This AIO camera can be installed in minutes and ready to fly. Its signal range is ideal for park flyers or racing quads.

Specifications:
• Output power: 25mW
• Frequency: 48CH
• Input Voltage: 3.3–5.5V
• Current consumption: 280mA
• Camera resolution: 600TVL
• Video Format: NTSC
• Field of view: 120°
• Antenna: Clover antenna
• Frequency: 5.8GHz 6 bands 48 channels, with Raceband
• Size: 15*12.5mm (L*W)
• Weight: 4.5g

Open box

 

 

Contents
20170817_140626_wm
• S2 AIO FPV Camera
• Adapter cable
• English Manual


S2 AIO FPV camera

 

English manual

 

 

Test setup

 

I will be using an OTG FPV receiver that I bought from GearBest using the Go FPV app on my Samsung S7 edge to record the videos. The AKK AIO FPV camera will be setup on my JYU Hornet S.

 

Videos
AKK BA3


AKK S2


Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: