Thank you Viofo for sending over this review sample of their latest Viofo A119 Pro.
• Processor: Novatek 96660
• Sensor: Aptina AR0521
• Lens: 7G 130° wide angle lens view
• Aperture: F1.8
• Resolution: 1440p 30fps, 1296P 30fps, 1080p 30/60fps, 720 30/60fps
• 2″ High Resolution TFT
• Support up to 128GB microSD card
• GPS mount (optional)
• CPL filter (optional)
• Built-in super capacitor
• Parking mode (requires hardwire kit)
• A119 Pro
• GPS mount
• Non-GPS mounts x2
• Suction mount
• Dual USB car charger
• Long mini USB cable
• Short mini USB cable
• Cable clips x5
• EVA foam
• Spare mount tape
• Nylon string
• User manual
Dual USB car charger
A new dual USB car charger. Different from the dual USB car charger that came with the A119 & A119S.
Long mini USB cable
Short mini USB cable
The EVA foam is for dampening vibrations between the GPS mount and the A119 Pro.
Spare mounting tape & nylon string
Initial firmware out of the box
Will be using a 64GB Samsung Evo Plus for the recordings.
Below is recorded in 2560×1440 30fps with an overall bit rate of 24.3 Mb/s without the CPL filter.
Below is recorded in 1920×1080 60fps with an overall bit rate of 20.5 Mb/s without the CPL filter.
Recorded using firmware v1.2 in 2560×1440 30fps with an overall bit rate of 24.3 Mb/s without the CPL filter.
The A119 Pro uses the same shell as the A119 & A119S. The only difference is the lens and sensor. Also the inclusive of the suction mount & EVA foam is an added plus.
The image quality of the videos is kinda lacking compared to the A119 & A119S. But as an owner of both the A119 & A119S, knowing that Viofo will release a firmware later for the A119 Pro that will greatly improve the image quality like how they did for the A119 & A119S. Can’t wait.
Will update again with videos when there is a new firmware released for the A119 Pro.